FOAM CHARACTERISTICS

Physical characteristics

 Metric measures (IS)

Imperial measures

 Test method
Compressive strength 223 kpa   ASTM 1621
Tensile strength 208 kpa   ASTM 1623
Flexural strength 298 kpa    
Shearing strength 175 kpa   ASTM C273
Polyisocyanurate foam density 40 kpa 2,5 lb  
Water vapour transmission 36.5 kpa   ASTM C355

PAN-ISOX PANELS CHARACTERISTICS, 4'X8'(1.22m X 2.44m) R-30

Physical characteristics

 Metric measures (IS)

Imperial measures

 Test method
Compressive strength 18 181 kg 40 007 lb ASTM E 72-80
Flexural strength 2 954 kg 6 500 lb ASTM E 72-80
Flexion-compression strength 17 272 kg 38 000 lb ASTM E 72-80
Shearing strength 1 909 kg 4 200 lb ASTM E 72-80


• Both resistant and stable, PAN-ISOX® panels are made of foam laminated with a covering of cement or oriented strand board (OSB). Their cellular structure can withstand the combined forces of wind, heavy snow and pressure variations.

• PAN-ISOX® panels meet all safety requirements when used according to the manufacturer’s instruction manual.

• When PAN-ISOX® panels are used to build walls and ceilings, they can be covered with traditional or fire-resistant materials.

• Wood- or cement-covered panels with polyisocyanurate foam in the center provide a thermal insulation factor of over R-30 when installed according to the manufacturer’s instruction manual. Thermal bridges are thus eliminated and the overall construction can then attain a uniform thermal insulation factor of R-30.

• Openings (doors and windows) can be built using special panels cut to the required dimensions.

plan


Top of page